CAN/CGSB 186.5-94/ISO 6596/1:1985

CAN/CGSB 186.5-94/ 6596/1:1985

Print
View full size

CAN/CGSB 186.5-94/ISO 6596/1:1985 English, French Printed Edition [ Withdrawn ] Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Two-Frequency Recording at 7 958 ftprad, 1.9 tpmm (48 tpi), on One Side - Part 1: Dimensional, Physical and Magnetic Characteristics

standard published 04/01/1994 by Canadian General Standards Board

More details

More info

Full Description

This part of ISO 6596 specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems.

NOTE - Numeric values in the SI and/or Imperial measurement system in this International Standard may have been rounded and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using Imperial units and further developments were made using SI units.