ANSI/AWWA C151/A21.51-09

This standard covers 3-in. through 64-in. (76 mm through 1,600 mm) ductile iron pipe, centrifugally cast, for water, with push-on joints or mechanical joints. Requirements for pipe covered by this standard are discussed in the text and are shown in tables and figures. This standard may be used for pipe with such other types of joints as may be agreed upon at the time of purchase. Section 1 discusses scope, purpose, and application. Sections 2 and 3 list references and definitions. Section 4 lists requirements, including: permeation; general requirements; coatings and linings; tolerances or permitted variations; weighing pipe; and, marking pipe. Section 5 discusses verification, including: inspection; test procedures, additional control tests by the manufacturer, foundry records, additional tests required by the purchaser, defective specimens and retests and rejection.

This product references:AASHTO T 99-01 (2009) - Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
ANSI/AWWA C104/A21.4-08 - Cement Mortar Lining for Ductile Iron Pipe and Fittings for Water, Includes Erratum (2010)
ANSI/AWWA C111/A21.11-07 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
ANSI/AWWA C150/A21.50-08 - Thickness Design of Ductile-Iron Pipe
ANSI/AWWA C600-05 - Installation of Ductile-Iron Water Mains and Their Appurtenances
ANSI/AWWA C800-05 - Underground Service Line Valves and Fittings (Also Included: Collected Standards for Service Line Materials)
ASTM D2487-06e1 - Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D3282-09 - Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM E8/E8M-08 - Standard Test Methods for Tension Testing of Metallic Materials
ASTM E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
This product referenced by:ANSI/AWWA C600-10 - Ductile-Iron Pipe, Centrifugally Cast, for Water
ANSI/AWWA C111/A21.11-12 - Ductile-Iron Pipe, Centrifugally Cast, for Water
This product replaces:ANSI/AWWA C151/A21.51-02 - American National Standard for Ductile-Iron Pipe, Centrifugally Cast, for Water

Browse Product Family:

ANSI/AWWA C151/A21.51-09
ANSI/AWWA C151/A21.51-02
ANSI/AWWA C151/A21.51-96

People Who Bought This Also Bought:
ANSI/AWWA C110/A21.10-08- Ductile-Iron and Gray-Iron FittingsANSI/AWWA C500-09- Metal-Seated Gate Valves for Water Supply ServiceANSI/AWWA D103-09- Factory-Coated Bolted Steel Tanks for Water StorageANSI/AWWA C303-08- Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder TypeANSI/AWWA C901-08- Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13 mm) Through 3 In. (76 mm), for Water ServiceASTM C117-04- Standard Test Method for Materials Finer than 75- micro m (No. 200) Sieve in Mineral Aggregates by WashingANSI/AWWA B100-09- Granular Filter MaterialANSI/AWWA B511-10- Potassium HydroxideANSI/AWWA C218-08- Liquid Coating Systems for the Exterior of Aboveground Steel Water Pipelines and FittingsANSI/AWWA C515-09- Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service