ANSI/AWWA C209-06

his standard covers protective exterior coatings that consist of cold-applied primers and prefabricated tapes and their applications to special sections, connections, and fittings to be used with underground and underwater steel water pipelines protected with organic coatings, such as those covered by ANSI/AWWA C203, ANSI/AWWA C210, ANSI/AWWA C213, ANSI/AWWA C214, ANSI/AWWA C215, and ANSI/AWWA C216. Such primers and tapes are not intended for use with exposed steel joints or sections of steel pipe where coatings of cement mortar or concrete have been applied directly onto the bare steel pipe. Tape coatings conforming to this standard may be field or shop applied. All AWWA steel pipe coating standards are written for and based on the service temperature of potable water. Cold-applied tape coatings have performed at higher than normal service temperatures of potable water systems. This standard does not cover the additional materials and procedures that may be required for difficult conditions, such as those encountered in construction of some submarine pipelines, casing pipe, river crossings, and pipelines that are in exceptionally rocky areas. Also, it is not intended to cover conditions of extended exposures aboveground after application. The purpose of this standard is to provide purchasers, manufacturers, constructors, and applicators with the minimum performance requirements for cold-applied tape coatings, including material, application, testing, marking, and packaging requirements.

This product replaces:ANSI/AWWA C209-00 - Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines

Browse Product Family:

ANSI/AWWA C209-06
ANSI/AWWA C209-00
ANSI/AWWA C209-95

People Who Bought This Also Bought:
ANSI/AWWA C214-07- Tape Coating Systems for the Exterior of Steel Water PipelinesANSI/AWWA C206-03- Field Welding of Steel Water PipeAWWA M11- Steel Water Pipe: A Guide for Design and Installation (M11), Fourth EditionANSI/AWWA C216-07- Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water PipelinesANSI/AWWA C200-05- Steel Water Pipe - 6 in. (150 mm) and LargerAWWA C210-07- Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water PipelinesAWWA C222-08- Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and FittingsANSI/ASME B30.9-2006- SlingsANSI/AWWA C213-07- Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water PipelinesANSI/AWWA C208-07- Dimensions for Fabricated Steel Water Pipe Fittings