SAE J 517

This SAE Standard provides general, dimensional and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment.The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document.This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user.The maximum working pressure of a hose assembly comprising SAE J517 hose and hose connectors per SAE J516, SAE J518, SAE J1453, etc., shall not exceed the lower of the respective SAE maximum working pressure values.When using SAE J 517 hose for marine applications, see SAE J 1475, SAE J 1942 and SAE J 1942-1.The SAE J517 100R9, 100R10 and 100R11 hoses are discontinued due to lack of demand. For DOD orders see Appendix C.The SAEJ 517 100R1A, 100R2A, 100R2B and 100R 2BT are discontinued due to lack of demand. For DOD orders replace 100R1A with 100R1AT, replace 100R2A, 100R2B and 100R2BT with 100R2AT.The SAE J517 100R2AT maximum working pressures will be replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R2 as type S.The SAE J517 100R16 maximum working pressures will be replaced by the type S maximum working pressures with the year 2009, eliminating the need to label 100R16 as type S.

This product replaced by:SAE J 517 - Hydraulic Hose
This product referenced by:ANSI/SIA A92.9-2011 - Hydraulic Hose
API Spec 17D - Hydraulic Hose
ANSI/SIA A92.2-2009 - Hydraulic Hose
ANSI/ASME ASP-2010 - Hydraulic Hose

Browse Product Family:

SAE J 517
SAE J 517

People Who Bought This Also Bought:
SAE J 343- Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose AssembliesSAE J 1853- Hand Winches~Boat Trailer TypeBS EN 14023:2010- Bitumen and bituminous binders. Specification framework for polymer modified bitumensSAE J 1402- Automotive Air Brake Hose and Hose AssembliesSAE J 516- Hydraulic Hose FittingsDIN EN 13765- Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - SpecificationASTM D2240-05(2010)- Standard Test Method for Rubber Property - ;Durometer HardnessSAE J 2044- Quick Connector Specification for Liquid Fuel and Vapor/Emissions SystemsASTM D2885-10- Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison TechniqueSAE J 849- Connection and Accessory Locations for Towing Multiple Trailers~Truck and Bus