SAE AMS 5637G

This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides.These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.



Keywords: AMS5637

This product replaced by:SAE AMS 5637H - Steel, Corrosion Resistant, Bars and Wire 18Cr 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relived 125 ksi (862 MPa) Tensile Strength