SAE AMS 6415S

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.These products have been used typically for parts, 3.5 inches and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.



Keywords: AMS6415

This product replaced by:SAE AMS 6415T - Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38 0.43C) (SAE 4340)
This product replaces:SAE AMS-S-5000A - Steel, Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock ( Cancelled: Mar 2007 )

Browse Product Family:

SAE AMS 6484D
SAE AMS 6415T
SAE AMS 6484C
SAE AMS 6415S
SAE AMS-S-5000A

People Who Bought This Also Bought:
SAE AMS 6414K- Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) (SAE 4340) Vacuum Consumable Electrode RemeltedSAE AMS 6409C- Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38-0.43C) (SAE) 4340) Special Aircraft Quality Cleanliness, Normalized and TemperedSAE J 1249- Former SAE Standard and Former SAE Ex-SteelsSAE J 1397- Estimated Mechanical Properties and Machinability of Steel BarsSAE J 404- Chemical Compositions of SAE Alloy SteelsSAE AMS 6484C- Steel, Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.38 - 0.43C) SAE 4340 Normalized and Tempered