AASHTO M 225M/M 225-09

1. SCOPE

1.1. This specification covers deformed steel wire which has been cold worked by drawing, rolling, orboth drawing and rolling to be used as produced, or in fabricated form, for the reinforcement ofconcrete in sizes having nominal cross-sectional areas not less than 6.45 mm2 [0.01 in.2].

1.2. Supplement S1 describes high-strength wire, which shall be furnished when specifically ordered.It shall be permissible to furnish high-strength wire in place of regular wire if mutually agreed toby the purchaser and manufacturer.

1.3. The values stated in either SI units or inch-pound units are to be regarded separately as standard.The values stated in each system may not be exact equivalents; therefore, each system shall beused independently of the other. Combining values from the two systems may result in nonconformancewith the standard. (The inch-pound units are shown in brackets except in Table 1.)

This product replaces:AASHTO M 225M/M 225-05 - Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement

Browse Product Family:

AASHTO M 225M/M 225-09
AASHTO M 225M/M 225-05

People Who Bought This Also Bought:
ANSI/AWWA C105/A21.5-05- American National Standard for Polyethylene Encasement for Ductile-Iron Pipe SystemsANSI/AWWA C110/A21.10-08- Ductile-Iron and Gray-Iron FittingsSAE AMS-QQ-A-200/8- Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded ( Reaffirmed: Apr 2007 Sep 2012 )AASHTO M 221M/M 221-09- Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete (ASTM Designation: A 497/A 497M-07)AASHTO T 180-09- Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) DropANSI/AWWA C111/A21.11-07- Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and FittingsANSI/AWWA C208-07- Dimensions for Fabricated Steel Water Pipe FittingsJIS D 5301:2006- Lead-acid starter batteriesANSI/AWWA C104/A21.4-08- Cement Mortar Lining for Ductile Iron Pipe and Fittings for Water, Includes Erratum (2010)ANSI/AWWA C115/A21.15-05- Standard for Flanged Ductile-Iron Pipe With Threaded Flanges