ANSI/ISA 75.08.05-2002

Formerly ANSI/ISA 75.15-1994

This standard applies to buttweld-end globe-style controls valves, sizes 15 mm (1/2 inch) through 450 mm(18 inches) for Classes 150 through 2500, having top, top and bottom, port, or cage guiding.

The purpose of this standard is to aid users in their piping designs by providing buttweld-end globestylecontrol valve dimensions, without giving special consideration to the equipment manufacturer to beused.

The short-long dimensions provided in Table 1 clarify 2.1 by consolidating the diversity of existingmanufacturers? lengths into two sets of dimensions for each valve size. Before using either the short orlong dimensions, the piping designer should confirm with the selected valve manufacturer which dimensionis correct for the valve(s) being supplied.

People Who Bought This Also Bought:
ISA 75.08.01-2002 (R2007)- Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (ANSI Classes 125, 150, 250, 300, and 600)ANSI/ISA 75.08.06-2002 (R2007)- Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (ANSI Classes 900, 1500, and 2500)ANSI/ISA 75.08.07-2001 (R2007)- Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300 and 600)ANSI/ISA 75.22-1999- Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (ANSI Classes 150, 300, and 600)ANSI/ISA 75.08.02-2003- Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600)ANSI/ISA 75.08.08-1999 (R2007)- Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300, and 600)