Full Description

1.1 This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain-end design. 1.4 Pipe and pipe fittings shall be of the sizes specified in Table 1 and Table 2 and Figs. 1-71 or other sizes that shall be permitted to conform to the requirements given herein. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm.
Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm.
Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: Flange dimensions are 150 lb ANSI standard. Note 2: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Size, in. t, in. Weight, lb Working
Length, ft Overall Length  2  ⁵/₁₆  0.31 7   7 ft 2⁵/₈ in.  3  ⁵/₁₆  0.31 7   7 ft 2⁵/₈ in.  4  ⁵/₁₆  0.31 7   7 ft 2⁵/₈ in.  6  ¹³/₃₂  0.40 7   7 ft 3 in.  8  ¹³/₃₂  0.40 7   7 ft 3 in. 10  ⁵/₈  0.62 7   7 ft 3⁷/₈ in. 12  ⁵/₈  0.62 5   5 ft 4 in. 15  ⁷/₈  0.75 5   5 ft 4¹/₈ in. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: Depth of seal on all traps shall be 2¹/₂ in. Note 2: 1 in. = 25.4 mm. Note 1: Depth of seal on all traps shall be 2¹/₂ in. Note 2: 1 in. = 25.4 mm. Note 1: Single hub vent is located on the inlet side. Depth of seal on 8 and 10 in. traps is 3 in. All others 2¹/₂ in. Note 2: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Note 1: 1 in. = 25.4 mm. Plate
No. Size,
in. A,
in. B,
in. C,
in. D,
in. E,
in. F,
in. 1
2 3
4 8
8 9
9 5⁷/₈ 
6/₈  1¹/₂ 
1¹/₂  14
14 14¹/₂ 
14¹/₂  Note 1: 1 in. = 25.4 mm.
Note 1: 1 in. = 25.4 mm. Note 1: Furnished with flat loose strainer plates. Note 2: 1 in. = 25.4 mm. Note 1: Traps can be supplied without cleanouts, as shown in the figure. Note 2: 1 in. = 25.4 mm. 1.4.1 Pipe:  1.4.1.1 No-Hub (MJ) (Fig. 1):    Size (in.) Length (ft)   1¹/₂  7   2 7   3 7   4 7 1.4.1.2 Hub/Plain End (Fig. 35):    Size (in.) Length (ft)    2 7    3 7    4 7    6 7    8 7   10 5   12 5   15 5 1.4.2 Fitting (No-Hub) (MJ):   Figs. Quarter Bends 2 Sixth Bends 3 Return Bends 4 Double-Branch Quarter Bend 5 Eighth Bends 6 Sixteenth Bends 7 Long-Sweep Quarter Bends 8 Sanitary Y Branches 9 Double-Branch Sanitary Y 10 Sanitary Combination Y and ¹/₈ Bend 11 Double-Branch Sanitary Combination Y and ¹/₈ Bend 12 Sanitary T Branches 13 Double Branch Sanitary T 14 Sanitary Running Traps 15 Sanitary P Traps 16 Swivel Trap P-Style, Short 17 Swivel Trap P-Style, Long 18 Swivel Trap S-Style, Long 19 Centrifugal Drum Trap P Swivel Type 20 Centrifugal Drum Trap S Swivel Type 21 Combination Cleanout and Test Tees 22 Coupling 23 Pipe Plugs 24 Cleanout Plugs 25 No-Hub (MJ) Adapter 26 Reducers-Increasers 27 Sink Outlet 28 Sink Overflows 29 Threaded Adapters 30 Trap Cleanout Details 31 No-Hub (MJ) Adapter 32 (MJ) (No-Hub) to Lead Adapter 33 Floor Drains 34 1.4.3 Fitting (Hub/Plain End):    Figs. Hub Plain-End Pipe 35 Straight Tees 36 Sanitary T Branches 37 Sanitary Y Branches 38 Double-Branch Sanitary Tee 39 Double-Branch Sanitary Y 40 Double-Branch Sanitary Combination Y and ¹/₈ Bend (T-Y) 41 Short-Sweep Quarter Bends 42 Long-Sweep Quarter Bends 43 Sanitary Combination Y and ¹/₈ Bend (T-Y) 44 Quarter Bends 45 Sixth Bends 46

Product Details

Published: 05/01/2023 Number of Pages: 26 File Size: 1 file , 1.2 MB Note: This product is unavailable in Russia, Ukraine, Belarus