CAN/CGSB 4.2 No. 14-2005

The procedures that follow can be used to analyze mixtures of many commonly occurring textile fibres. In selecting these procedures, a number of possible methods were considered. Interlaboratory analyses of prepared fibre mixtures of known composition were carried out, and only those methods found to be satisfactory were accepted. In most cases, the scope of the method is given, and provision is made for estimating the accuracy of the result obtained.

If the types of fibres present in the mixtures are not known, they must be identified before quantitative analysis can be undertaken.

The accuracy of the results obtained with these methods decreases if non-removable non-fibrous materials are present.

The manual separation method is technically equivalent to International Standard ISO 5088, Textiles - Ternary fibre mixtures - Quantitative analysis, Section 3, Method of analysis by manual separation, but it is written in the same format as the remainder of the methods detailed herein.

The chemical test methods are similar to International Standard ISO 1833, Textiles - Binary fibre mixtures - Quantitative chemical analysis.

For the quantitative analysis of fibre mixtures for which methods have not yet been included in this document, reference may be made to the methods issued by the American Association of Textile Chemists and Colorists (AATCC), the British Standards Institution (BSI), the International Organization for Standardization (ISO) or the ASTM International.

This product replaces:CAN/CGSB 4.2 NO. 14-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Introduction
CAN/CGSB 4.2 NO. 14.1-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Wool - 70% Sulphuric Acid Method
CAN/CGSB 4.2 NO. 14.2-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Wool - Sodium Hypochlorite Method
CAN/CGSB 4.2 NO. 14.3-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Polyester - 75% Sulphuric Acid Method
CAN/CGSB 4.2 NO. 14.4-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Cotton and Regenerated Cellulose - Zinc Chloride/Formic Acid Method
CAN/CGSB 4.2 NO. 14.5-M91 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Acrylic or Modacrylic Fibres - Butyrolactone Method
CAN/CGSB 4.2 NO. 14.6-M91 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Acrylic and Modacrylic Fibres - Cyclohexanone Method
CAN/CGSB 4.2 NO. 14.7-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Acetate Fibres - Acetone Method
CAN/CGSB 4.2 NO. 14.8-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Triacetate Fibres - Dichloromethane Method
CAN/CGSB 4.2 NO. 14.11-M89 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Secondary and Triacetate Fibres - 70% Acetone Method
CAN/CGSB 4.2 NO. 14.12-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Nylon 6 or Nylon 6,6 - 80% Formic Acid Method
CAN/CGSB 4.2 NO. 14.13-M89 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Certain Spandex (Elastane) Fibres - Boiling Cyclohexanone Method
CAN/CGSB 4.2 NO. 14.14-M89 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Polyvinyl Chloride Fibres-Carbon Disulphide/Acetone Method
CAN/CGSB 4.2 NO. 14.15-M89 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Polypropylene Fibres - Xylene Method
CAN/CGSB 4.2 NO. 14.16-M88 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Binary Mixtures Containing Acetate and Polyvinyl Chloride Fibres - Glacial Acetic Acid Method
CAN/CGSB 4.2 NO. 14.17-M89 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Manual Separation
CAN/CGSB 4.2 NO. 14.18-M91 - Textile Test Methods - Quantitative Analysis of Multi-Fibre Blends
CAN/CGSB 4.2 NO. 14.9-M89 - Textile Test Methods - Quantitative Analysis of Fibre Mixtures - Microscopic Count Method

Browse Product Family:

CAN/CGSB 4.2 No. 14-2005
CAN/CGSB 4.2 NO. 14-M88
CAN/CGSB 4.2 NO. 14.17-M89 CORR.
CAN/CGSB 4.2 NO.14.13-M89 CORR.
CAN/CGSB 4.2 NO.14.14-M89 CORR.
CAN/CGSB 4.2 NO. 14.9-M89 CORR.
CAN/CGSB 4.2 NO. 14.15-M89 CORR.
CAN/CGSB 4.2 NO.14.11-M89 CORR.
CAN/CGSB 4.2 NO. 14.4-M88 AMEND.
CAN/CGSB 4.2 NO. 14.5-M91
CAN/CGSB 4.2 NO. 14.18-M91
CAN/CGSB 4.2 NO. 14.6-M91
CAN/CGSB 4.2 NO. 14.1-M88
CAN/CGSB 4.2 NO. 14.7-M88
CAN/CGSB 4.2 NO. 14.2-M88
CAN/CGSB 4.2 NO. 14.8-M88
CAN/CGSB 4.2 NO. 14.12-M88
CAN/CGSB 4.2 NO. 14.3-M88
CAN/CGSB 4.2 NO. 14.16-M88
CAN/CGSB 4.2 NO. 14.2-M88 CORR.
CAN/CGSB 4.2 NO. 14.4-M88 CORR.
CAN/CGSB 4.2 NO. 14.12-M88 CORR.
CAN/CGSB 4.2 NO. 14.16-M88 CORR.
CAN/CGSB 4.2 NO. 14.8-M88 CORR.
CAN/CGSB 4.2 NO. 14.3-M88 CORR.
CAN/CGSB 4.2 NO. 14.1-M88 CORR.
CAN/CGSB 4.2 NO. 14.7-M88 CORR.
CAN/CGSB 4.2 NO. 14.14-M89
CAN/CGSB 4.2 NO. 14.15-M89
CAN/CGSB 4.2 NO. 14.17-M89
CAN/CGSB 4.2 NO. 14.11-M89
CAN/CGSB 4.2 NO. 14.9-M89
CAN/CGSB 4.2 NO. 14.13-M89
CAN/CGSB 4.2 NO. 14.4-M88

People Who Bought This Also Bought:
CSA G40.20-04/G40.21-04 (R2009)- General Requirements for Rolled or Welded Structural Quality Steel/Structural Quality Steel